Firmac Slide-On-Flange Automatic Galvanised Coil Strip Feed Rollforming Machine System (Complete With Sealant Unit)

The Rollformer has lateral movement on tracks to align the selected roll-tooling. The saw is in a fixed position with an in-line movement only in order to cut while the profile is still in motion.

When all sections are in position and data is entered, the rollformer will run continuously until the quantity is reached, as will the sealant injection continue until the machine stops.  If at this point the coil is to be changed to another width or gauge then, while the machine is stopped, the strip will have to be cut manually near the coil and run the remaining strip out through the rollformer in a manual mode.

Slide-on Flange Former (SOFF)
Coil unwinders, 1 to 4, depending on customer requirements.
Coil unwinder support laterally movable and adjustable for coil selection.
Max. capacity 3 tons, i.e., 4 x 750kg.
18-22 Station Rollformer with 2 sets of tooling, 1 situated on the L/H side and 1 on the R/H side.  For example, 20/30mm or 25/35mm.
For example, if 20mm the Rollforming would be suitable for 0.7/0.8 galvanised sheet Z27 lockforming quality. If 30mm, the Rollforming would be suitable for 0.9/1.0 galvanised sheet Z27 lockforming quality.
Complete with automatic sealant injector system for injection on either operating side.
Fitted with encoders for length selection for the flying crosscut saw, selectable lengths via touch screen computer.
Run out roller conveyor roller table approx. 5.5 mtrs long with pneumatically controlled tipping mechanism for collation of each cut to length profile workpiece.